Christopher Knight Home Evelyn Mid Century Modern Fabric Arm Chair, Dark Gray, Walnut
- MID-CENTURY MODERN: Blending together iconic splayed legs with beautifully tufted upholstery, our club chair offers a mid-century look to your lounge space. With its clean lines and understated look, this chair uses new materials to reimagine a traditional design. Seat height: 17.75 inches
SAFAVIEH California Shag Collection Area Rug - 8' x 10', Ivory, Non-Shedding & Easy Care, 2-inch Thick Ideal for High Traffic Areas in Living Room, Bedroom (SG151-1212) 7'6" x 9'6" Ivory
- [NON-SHEDDING]: Expertly machine-woven from enhanced soft synthetic durable fibers that have a virtually non-shedding pile for ultimate convenience.Avoid Direct sunlight since direct sunlight will cause the colors in your area rug to fade over time
Umbra Hub Round Wall Mirror with Rubber Frame, Modern Style for Bathroom, Entryway, Living Room and More, 24-Inch, Black
- Glass
nuLOOM 5x8 Rigo Jute Hand Woven Area Rug, Natural, Solid Farmhouse Design, Natural Fiber, For Bedroom, Living Room, Dining Room, Hallway, Office, Kitchen, Entryway Natural 5 x 8 Feet
- Kid and Pet-Friendly Rug: This jute area rug is built to last in high traffic areas of your home. With its handmade nature, this rug was crafted to withstand everyday foot traffic from kids to pets while adding style and comfort to your space
MIULEE Pack of 2 Velvet Soft Solid Decorative Square Throw Pillow Covers Set Fall Cushion Cases for Sofa Bedroom Couch 18 x 18 Inch Golden 18" x 18" (Pack of 2) Golden
- Velvet
Have you ever looked at your wingback chair and thought it could use a little refresh? Maybe the fabric’s worn out or just doesn’t fit your style anymore. Upholstering the back of your chair might seem daunting, but it’s a rewarding project that can breathe new life into your favorite piece of furniture.
Key Takeaways
- Materials and Tools: Proper preparation includes gathering essential materials such as durable upholstery fabric, a staple gun, scissors, and batting, setting the stage for a successful project.
- Fabric Selection: Choose upholstery fabric that complements your style—consider patterned or solid options and always buy extra to accommodate mistakes during measurement.
- Chair Preparation: Thoroughly clean the chair frame and remove old upholstery carefully, inspecting for damage before reupholstering to ensure a solid foundation for the new fabric.
- Accurate Measuring and Cutting: Measure the chair’s dimensions meticulously, accounting for irregular shapes and seam allowances, and use sharp scissors for clean cuts, ensuring precise fitting pieces.
- Upholstering Technique: Fasten the fabric securely, starting from the center and working outward to maintain tautness, while finishing edges neatly to prevent fraying.
- Finishing Touches: Add decorative trim to enhance appearance, perform a thorough inspection for any imperfections, and clean the workspace, ensuring your newly upholstered chair looks polished and professional.
Materials Needed
Upholstering the back of a wingback chair requires specific materials and tools. Gathering everything in advance simplifies the process and ensures a smooth project. You’ll need fabric, supplies, and various tools to get started.
Fabric Selection
Choose upholstery fabric that complements your style and suits the chair’s purpose. Opt for durable materials like cotton, linen, or polyester blends. Consider these options:
- Patterned Fabric: Adds visual interest; choose a bold print or subtle texture.
- Solid Color Fabric: Allows for versatility; select a shade that matches your interior.
- Home Décor Fabric: Ensure it’s suitable for heavy use, especially if placed in a high-traffic area.
Always buy an extra yard or two to account for mistakes or pattern matching.
Tools Required
You’ll need basic tools to complete the upholstery project effectively. The essential tools include:
- Staple Gun: Secures the fabric to the chair frame; a heavy-duty model works best.
- Upholstery Staples: Ensure they fit the staple gun; typically, 1/2-inch or 3/8-inch staples work well.
- Scissors: Sharp scissors for cutting fabric; fabric-specific ones provide cleaner edges.
- Measuring Tape: Helps in measuring the fabric accurately; ensure you double-check your measurements.
- Flathead Screwdriver: Good for removing old staples and accessing hidden areas of the chair.
- Pliers: Useful for pulling out stubborn staples or fabric.
- Batting and Foam: Adds comfort and can be replaced if existing material looks worn.
Gather these materials and tools before you start; they’ll set the stage for a successful project.
Preparing the Chair
Preparing your wingback chair sets the foundation for a successful upholstery project. Focus on two main tasks: removing old upholstery and cleaning the frame.
Removing Old Upholstery
- Gather Tools: Use a flathead screwdriver and pliers for easier removal.
- Examine the Chair: Inspect how the old upholstery attaches, looking for staples or tacks.
- Start from the Bottom: Begin at the chair’s base. Carefully pry off staples using the screwdriver.
- Work Your Way Up: Continue removing fabric, moving from the bottom to the top. Take your time to not damage the wood frame.
- Keep Parts Intact: Save sections of fabric for measuring new pieces. Label them if necessary.
- Dispose of Old Material: Once everything’s removed, discard the old fabric and batting responsibly.
- Dust and Debris: Use a vacuum or damp cloth to clean the frame thoroughly.
- Inspect for Damage: Check for dents, chips, or loose joints. Repair any issues before reupholstering.
- Use Wood Cleaner: Apply a gentle wood cleaner for any stubborn stains.
- Dry Completely: Allow the frame to dry fully before proceeding with the new upholstery. This prevents mold and ensures proper adhesion of new fabric.
Following these steps prepares your wingback chair for its new look, ensuring a smooth upholstery process.
Measuring and Cutting Fabric
Measuring and cutting fabric accurately is essential for a successful upholstery project. Follow the steps below to ensure precise results.
Measuring Techniques
- Wrap the Measuring Tape: Use a measuring tape to wrap around the curved areas of the chair back. This technique captures the unique shapes of the wingback design.
- Take Multiple Measurements: Measure the width and height of the back. Measure various points to capture any irregularities, especially around the wings and top.
- Account for Seam Allowance: Add 2-3 inches to every measurement for seam allowance. This extra fabric ensures comfortable fitting and allows for any adjustments.
- Mark the Fabric: Use fabric chalk or a marker to clearly indicate your measurements on the fabric before cutting. This step reduces the chance of errors during cutting.
- Use Sharp Scissors: Invest in a pair of sharp fabric scissors for clean edges. Dull scissors can create frayed edges, which affect the overall appearance.
- Cut Straight Lines: Follow the marked lines carefully. Cutting slowly yields better results, providing a more polished finish.
- Cut One Piece at a Time: If you’re working with multiple pieces of fabric for different sections, cut each piece individually. This approach helps maintain accuracy.
- Check Your Cut: After cutting, compare the fabric pieces to your original measurements. Ensure they fit as expected and adjust if necessary before moving on to the next steps.
Upholstering Process
Upholstering the back of a wingback chair transforms its appearance and brings back its charm. Follow these steps for a successful upholstery project.
Attaching the Fabric
- Position the Fabric: Lay the fabric on the chair back, ensuring it aligns with existing contours. Start at the top, allowing excess fabric to drape down.
- Center the Fabric: Make sure the pattern, if any, is centered. Adjust as necessary to get a balanced look.
- Secure with Temporary Fasteners: Use upholstery pins or clamps to hold the fabric in place while you assess the fit. This allows easy adjustments before permanent attachment.
- Begin at the Center: Start stapling from the center of the top edge, driving the staple into the wooden frame with the staple gun. This creates a stable anchor point.
- Work Outward: Gradually staple outward, alternating sides. Ensure the fabric remains taut but not stretched, which will lead to puckering.
- Tack the Bottom: Once the top is fully secured, pull the fabric toward the bottom, repeating the stapling process. Use the flathead screwdriver to tuck excess fabric neatly into the frame before stapling.
- Finish the Edges: For a clean finish, fold fabric edges under and staple securely. This helps prevent fraying and gives a polished appearance.
Using these methods will enhance the look and durability of your newly upholstered wingback chair.
Finishing Touches
Adding the final details to your wingback chair upholstery project elevates its overall look. These finishing touches can make a significant difference in the final appearance and durability of your chair.
Adding Trim
Trimming enhances the chair’s design and conceals raw edges. Use various types of trim like welt cord, piping, or decorative braids.
- Selecting Trim: Choose a trim color or pattern that complements your fabric. Consider both texture and contrast for visual interest.
- Measuring: Measure the lengths where the trim will be attached. Cut the trim to size, ensuring each piece is slightly longer than needed for adjustments.
- Attaching Trim: Start by securing one end of the trim along a seam or edge, using a staple gun or hot glue. Continue attaching, keeping the trim taut but not stretched. Repeat this around the chair, checking for even spacing.
Final Inspection
Inspecting your work ensures a polished finish. The final inspection addresses any adjustments necessary to achieve a flawless look.
- Checking Tightness: Look for areas where the fabric isn’t taut. If you find any, re-staple those sections, ensuring smooth surfaces.
- Inspecting Edges: Examine all edges for any frayed or untrimmed fabric. Use sharp scissors to trim any excess that disrupts the sleek appearance.
- Evaluating Patterns: If you selected patterned fabric, ensure patterns align at seams. Make adjustments as needed to achieve continuity.
- Cleaning Up: Remove any leftover staples or debris from your workspace. A clean environment highlights your work and prepares it for use.
These finishing touches refine your upholstery project, enhancing both aesthetics and functionality.
Conclusion
Upholstering the back of your wingback chair can be a rewarding experience that breathes new life into your favorite piece of furniture. By following the steps outlined and putting in a little time and effort, you’ll not only enhance its appearance but also ensure it fits your style perfectly.
Don’t forget to add those finishing touches that make all the difference. Whether it’s a touch of trim or a thorough inspection for any last-minute adjustments, these details can elevate your project from good to great.
So grab your tools and fabric and get started on this fun DIY adventure. You’ll be amazed at how much joy a refreshed chair can bring to your space. Happy upholstering!
Frequently Asked Questions
What materials do I need to refresh a wingback chair?
To refresh a wingback chair, you’ll need upholstery fabric (cotton, linen, or polyester blends), a staple gun, upholstery staples, scissors, measuring tape, a flathead screwdriver, pliers, and batting or foam for comfort.
How do I prepare the chair before upholstering?
Begin by removing old upholstery carefully, saving sections for measurements. Clean the chair frame using wood cleaner, inspecting it for any damage. Ensure the frame is completely dry before you start applying new upholstery.
How should I measure fabric for the chair?
Wrap measuring tape around the chair’s contours, taking multiple measurements for accuracy. Add 2-3 inches for seam allowance. Mark the fabric clearly and cut it with sharp scissors for clean edges.
What is the best way to attach the fabric?
Start by centering the fabric on the chair back, using temporary fasteners like upholstery pins to secure it. Begin stapling from the center of the top edge, working outward to ensure the fabric remains taut.
How can I add finishing touches to my wingback chair?
Enhance your chair’s design with trim, like welt cord or decorative braids. Measure, cut, and attach the trim to conceal raw edges. Conduct a final inspection to check for tightness and clean any debris for a polished finish.